7″ Diamond Coring Machine (2 Speed) – SHIBUYA

RM 6.700.00

Maximum Bit Capacity: 180 mm ( 7″)

Applications and Features

Ideal machine for small-middle size jobs.
Multi-position water swivel inlet for convenience.
Right and left hand feed handle positions.
Two speed motor.
Built-in on/off switch with low voltage drop-out and motor overload protection.
Two motor available: R1521 (Normal) / R1522 (Small diameter).
Portable Residual Current Device (P.R.C.D.) automatically shuts off electricity in the event of electric leakage. (220-240 V only)
Includes water collector ring.
Normal Stand Column: 800 mm (31″) with 548 mm (21″) stroke.
Angle Drill AB52 Column: 1000 mm (39″) with 748 mm (29″) stroke. Case Version Column: 560+200 mm (30″). with 508 mm (20″) stroke. (extension 200 mm column in use)
50 x 50 mm (2″ x 2″) square column.
Tool kit including wrenches and allen keys.

CATEGORY: 7″, Core Drill Machine, Shibuya

DESCRIPTION

SPECIFICATION

STANDARD TOOL KIT

Rated Input	1,500 W
Voltage	AC 110-120 V / AC 220-240 V 50/60 Hz
Speed	2
Spindle Revolutions at No Load	700/1000 rpm (R1521) / 700/1400 rpm (R1522)
Spindle Revolutions at Rated Load	510/730 rpm (R1521) / 510/1000 rpm (R1522)
Recommended Core Bit Diameter	50 – 180 mm (R1521) / 30 – 180 mm (R1522)
Spindle Thread	UNC 1 -1/4″ / A-Rod
Weight	R1521 motor excl. Power Plug and Cord: 6.9 kg / TS-162(L800): 7.1 kg / TS-162(AB52)(L1000): 9.4 kg
Height	803 mm / 1003 mm / 600 + 200 mm (Case)
Base Size	146 x 205 mm
Available Stroke	548 mm / 748 mm (L1003 mm) / 548 mm (Case)